P.O. Box 5258 Topeka, KS 66605-0258      |      1934 S. Kansas Ave. Topeka, KS 66612      |      Call - 785-357-0341      |      Fax - 785-357-6514

Bob Florence Contractor, Inc.

Bob Florence Contractor, Inc.
1934 S. Kansas Ave. Topeka, KS 66612 Call - 785-357-0341 Fax - 785-357-6514

SERVICES - ULTRAWALL® DEMOUNTABLE WALL SYSTEM

Leave Us A Review!

Log in.

Write A Review.

It’s That Easy!

For executive or managerial offices and healthcare settings that require greater privacy, the ULTRAWALL® system is the perfect sound barrier. Yet even with its superior performance, the system is both affordable and aesthetically pleasing. Wall panels with a pass-through sliding window kit provide both convenience and privacy. 24” wide, pre-kerfed, pre-decorated ¾” type X USG gypsum panels. Vinyl finishes and contemporary fabrics accommodate most design requirements Incorporates full-height glass, chari rail, clerestory, glass sidelights, pass-through openings and hinged and sliding doors STC rating 42-47 One-hour fire rating

ULTRAWALL® DEMOUNTABLE WALL SYSTEM

ULTRAWALL Panels in a complete office installation

can be easily recongifured as your needs change.

Partition walls create workplace sound control.

Black trim on these offices was selected to match

the existing ceiling grid.

ULTRAWALL® DEMOUNTABLE WALL SYSTEM

The ULTRAWALL® System is ideal for settings that require beautiful

appearance, generous glazing, and excellent sound and fire

performance. It is an ideal choice for most office settings and for

other spaces requiring privacy.

ULTRAWALL® Demountable Wall System

Ceiling track and floor runner are installed first. Then studs engage

into the kerfed edges of gypsum panels to align panels.

Fast Assembly

Wiring for utilities, telecommunications, and data systems can run

either vertically or horizontally in the wall.

Wire Management

Door openings, sidelights, and glass walls can be located at any

point along the wall. T- or H-studs accommodate different panel

configurations or finishes on opposite sides of the wall. To

accommodate changing space requirements, the walls can be easily

relocated.

Flexibility

Standard finishes include fabric and vinyls. Custom finishes

available. Call Bob Florence customer service for samples.

Finish Selection

Thermafiber® sound attenuation fire blankets can be placed in the

wall cavity to increase sound and fire ratings. Thermafiber®

blankets are paperless, semi-rigid, mineral fiber mat 24” x 48” (610

mm x 1219 mm) in 1” or 1½” (25 or 38 mm) thickness.

Fire and Sound Insulation

COMPONENTS

FEATURES

Ceiling Track

Steel— 3⅝” (92 mm) width, 1¼” (32 mm) flange. Painted.

Extruded Aluminum— Flanged rail (ARL-300). 3⅝” (92 mm) width,

1¼” (32 mm) flange. Satin anodized or ultrabronze standard

finishes. Paint finish optional.

Cavity Width

1 ⅞” (48mm)

Wall Width

3⅜” (86mm)

GYPSYM PANELS

¾” x 24” (19 x 619 mm) Type X USG. Factory kerfed, bevel edge to fit

stud.

STC Range

42-47

Studs

Steel— Roll-formed galvanized steel “H” or “T” configuration. Studs

terminate 3” (75 mm) from floor and ceiling to accommodate utility

passage and floor-to-ceiling height variations.

Fire Rating

1 Hour

Flame Spread/Smoke Developed (vinyl)

Class A

Footnote: 1. ULTRAWALL® partitions can be

modified to meet more stringent fire and

sound requirements.

Floor Track

extruded Aluminum– 3¾” (95 mm) width, ¾” (19 mm) flange. Steel—

Galvanized Steel. 1⅞” (48 mm) width, 1⅛” (29 mm) flange. Optional.

Floor Base

PVC— 4” (102 mm) Extruded vinyl snap-on base. Standard colors

available. Glue-on base optional.

VERTICAL COMPONENTS

Extruded Aluminum with satin anodized or standard paint finishes.

DOOR FRAMES

Extruded Aluminum— SMR-Delta. Self mortising, reversible. Full

height or mitered door frames. Satin anodized or standard paint

finishes.

DOORS AND HARDWARE

Choose from hinged or sliding door products in aluminum,

hardwood, paint grade, or plastic laminate, including prefinished

architectural doors. Glass inserts available. Door hardware to

match building standard or as specified.

GLASS AND GLAZING

Extruded Aluminum components engineered for ¼” tempered

glass. Satin anodized or standard paint finishes. All glass supplied

by Bob Florence Contractor, Inc. shall be tempered glass and each

piece will display the required label.

For executive or managerial offices and healthcare settings that require greater privacy, the ULTRAWALL® system is the perfect sound barrier. Yet even with its superior performance, the system is both affordable and aesthetically pleasing. Wall panels with a pass-through sliding window kit provide both convenience and privacy. 24” wide, pre-kerfed, pre-decorated ¾” type X USG gypsum panels. Vinyl finishes and contemporary fabrics accommodate most design requirements Incorporates full-height glass, chari rail, clerestory, glass sidelights, pass-through openings and hinged and sliding doors STC rating 42-47 One-hour fire rating

ULTRAWALL® DEMOUNTABLE WALL SYSTEM

ULTRAWALL Panels in a complete office installation

can be easily recongifured as your needs change.

Partition walls create workplace sound control.

Black trim on these offices was selected to match

the existing ceiling grid.

ULTRAWALL® Demountable Wall System

ULTRAWALL® Demountable Wall System

The ULTRAWALL® System is ideal for settings that require beautiful appearance, generous glazing, and excellent sound and fire performance. It is an ideal choice for most office settings and for other spaces requiring privacy.

Fast Assembly

Ceiling track and floor runner are installed first. Then studs engage into the kerfed edges of gypsum panels to align panels.

Wire Management

Wiring for utilities, telecommunications, and data systems can run either vertically or horizontally in the wall.

Flexibility

Door openings, sidelights, and glass walls can be located at any point along the wall. T- or H-studs accommodate different panel configurations or finishes on opposite sides of the wall. To accommodate changing space requirements, the walls can be easily relocated.

Finish Selection

Standard finishes include fabric and vinyls. Custom finishes available. Call Bob Florence customer service for samples.

Fire and Sound Insulation

Thermafiber® sound attenuation fire blankets can be placed in the wall cavity to increase sound and fire ratings. Thermafiber® blankets are paperless, semi-rigid, mineral fiber mat 24” x 48” (610 mm x 1219 mm) in 1” or 1½” (25 or 38 mm) thickness.

FEATURES:

Cavity Width

1 ⅞“ (48mm)

Wall Width

3 ⅜“ (86mm)

STC Range

42-47

Fire Rating

1 Hour

Flame Spread/Smoke Developed (vinyl)

Class A

Footnote: 1. ULTRAWALL® partitions can be modified to

meet more stringent fire and sound requirements.

COMPONENTS:

Ceiling Track

Steel— 3⅝” (92 mm) width, 1¼” (32 mm) flange. Painted. Extruded Aluminum— Flanged rail (ARL-300). 3⅝” (92 mm) width, 1¼” (32 mm) flange. Satin anodized or ultrabronze standard finishes. Paint finish optional.

GYPSYM PANELS

¾” x 24” (19 x 619 mm) Type X USG. Factory kerfed, bevel edge to fit stud.

Studs

Steel— Roll-formed galvanized steel “H” or “T” configuration. Studs terminate 3” (75 mm) from floor and ceiling to accommodate utility passage and floor-to-ceiling height variations.

Floor Track

extruded Aluminum– 3¾” (95 mm) width, ¾” (19 mm) flange. Steel— Galvanized Steel. 1⅞” (48 mm) width, 1⅛” (29 mm) flange. Optional.

Vertical Components

Extruded aluminum with satin anodized or standard paint finishes.

Door Frames

Extruded Aluminum— SMR-Delta. Self mortising, reversible. Full height or mitered door frames. Satin anodized or standard paint finishes.

Floor Base

PVC— 4” (102 mm) Extruded vinyl snap-on base. Standard colors available. Glue-on base optional.

Doors and Hardware

Choose from hinged or sliding door products in aluminum, hardwood, paint grade, or plastic laminate, including prefinished architectural doors. Glass inserts available. Door hardware to match building standard or as specified.

Glass and Glazing

Extruded Aluminum components engineered for ¼” tempered glass. Satin anodized or standard paint finishes. All glass supplied by Bob Florence Contractor, Inc. shall be tempered glass and each piece will display the required label.
P.O. Box 5258 Topeka, KS 66605-0258 | 1934 S. Kansas Ave. Topeka, KS 66612

Bob Florence Contractor, Inc.

Call - 785-357-0341      |      Fax - 785-357-6514

SERVICES - ULTRAWALL®